Page 21: 4 binding the phantom 2 vision+ and range extender, Powering on the range extender 21, 4 binding the phantom 2 vision+ and, Range extender
12 DJI VISION App Usage The DJI VISION App controls the PHANTOM 2 VISION camera including capture and recording, settings, pitch angle adjustments, and displays essential status including flight parameters and battery life. 12.1 DJI VISION App Main Menu After login you will come to the main page. How to Use DJI Phantom Vision + Plus Assistant Software. Calibration, Setup, Change to Naza-M - Switches & Mode Setup Tutorial - DJI Phantom 2 Transmitter Calibration Tutorial & Setup - How to Calibrate DJI Phantom 2 Remote Control and Gimbal - Calibrating the IMU - DJI Phantom 2 Vision The basics of Flying, Recording & Sharing - DJI Phantom 2. On this page you find the DJI Phantom 2 Vision+ manual. Please read the instructions in this operator manual carefully before using the product. If you have any questions about your that are not answered in the manual, please share your question in the troubleshooting section on the buttom of this page. Phantom 2 vision, User manual. Read online or download PDF. DJI Phantom 2 Vision Plus User Manual User Manual Manuals Directory ManualsDir.com - online owner manuals library Search.
Advertising
Assembly and Use
©
2014 DJI. All Rights Reserved.
21
Powering on the Range Extender
(1) Flick the power switch to the ON position.
(2) Wait for approximately 30 seconds. The Wi-Fi signal indicator will blink green indicating the Range Extender is
communicating properly.
(3) Keep the Range Extender facing the aircraft during flight for the best communication link.
Power off the Range Extender after every flight to avoid discharging the battery.
Checking the Battery Level
The battery level of the Range Extender can be checked in the camera page of the DJI VISION App as shown below.
When the battery level drops to 20% or lower, the battery level icon will go red as a charging reminder.
6.3 Rename Range Extender SSID
Make your Range Extender SSID easier to remember by changing its name.
(1) Tap “Rename SSID of Range Extender” in the Settings page. Enter a new SSID name (e.g. Phantom_Tom) in the
textbox.
![Dji Phantom 2 Vision Manual Dji Phantom 2 Vision Manual](/uploads/1/2/6/4/126414643/882707644.png)
(2) Tap and you will be asked to enter the last six characters of your MAC address on the Range Extender to
confirm the change. The MAC address can be found on the sticker on your Range Extender. If your MAC address is
60:60:1F:60:41:E7, then enter 6041E7.
(3) Tap “OK” to confirm the change. The Range Extender will automatically restart and the App will return to the settings
page. Approximately 30 seconds later, the new network name can be found in the Wi-Fi list of your mobile device.
Select and connect the renamed network to use the DJI VISION App.
6.4 Binding the Phantom 2 Vision+ and Range Extender
If the connection between the Phantom 2 Vision+ and the Range
Extender fails, or one of them needs to be repaired or replaced, a
camera and Range Extender binding will need to be performed through
the DJI VISION App.
Binding Reset
Button
Figure 30
Preparing the Range Extender
battery level under 20%,icon goes red
Dji Phantom 2 Vision Downloads
battery level above 20%, icon is blue
Dji Phantom 2 Vision Plus Manual Portugues
Figure 31
Figure 32
Figure 33
Figure 34
Figure 35
Advertising
Popular Brands
Popular manuals